Home » Handyman

Category Archives: Handyman

How to Repair Drywall

Drywall is a wonderful construction material because it is inexpensive and easy to hang, drill into, finish, and paint. Unfortunately, even though it is sturdy, it can still get damaged fairly easily.Drywall

Small holes, such as those caused by nail pops and other wall fasteners, are simple to repair with drywall patch kits and a putty knife. Once the patch is dry and sanded smooth, it is ready for texture. If you want some help from professionals, call Drywall Repair Las Vegas.

As a homeowner, you will encounter drywall cracks and nail and screw pops at some point. These are natural occurrences and result from a few common causes like temperature fluctuation and structural settling. While these can be unsightly and frustrating, they are not always a sign of major problems. The good news is that if you take the time to repair these issues, they will not recur.

Drywall cracks usually begin at the seams where drywall panels meet. They can occur in the ceiling or the walls, but are more common at doors and windows where stress is placed on the wall structure. These cracks are considered cosmetic and can be easily covered up when repainting is done.

Cracks that appear in the center of a room may be caused by foundation settling. They can also result from a lack of proper support in the home’s framing. In these cases, a professional should inspect the foundation and frame to locate and correct the issue before continuing with drywall repairs.

Water damage is another common cause of drywall cracks. It can lead to yellowing and browning of the drywall, which can be quite unsightly. When left untreated, these leaks can saturate the drywall, which results in cracking. If you notice a drywall crack in your home that is associated with water damage, it is important to address the issue quickly to avoid further damage to the drywall and other building materials.

The most common way to repair drywall cracks is by re-taping the seams. You can use paper tape or fiberglass tape, but be sure to apply a thin coat and smooth it out with a utility knife. Use a fresh blade for this process to avoid damaging the surface. Once the drywall compound dries, it should be lightly sanded to smooth the rough edges. Finally, the area should be primed to seal the filler and prevent it from absorbing the new paint.

If the crack extends past a seam, cover it with a piece of painters’ tape to protect any adjacent woodwork or trim material. Then, using a utility knife, cut a V-shaped groove the entire length of the crack. Finally, use a drywall joint primer to fill the crack and prepare it for painting.


If you have a nail hole in your wall or ceiling, it’s easy enough to fix with spackle or joint compound (aka mud) and a putty knife. You’ll need to clean the hole and sand around it before applying the compound. Paint the repaired area a color that matches the surrounding wall. If you don’t have the right color on hand, take a sample of the wall or ceiling to a paint supply store for matching.

Larger holes require a little more skill and work. Depending on the size, you may need to build up the wall behind the hole or install a patch. If you’re not comfortable with these jobs, bringing in a pro is often the best option.

If the hole is from a nail, simply pull the nail out with your fingers or pliers instead of a hammer. This will minimize the damage and prevent the nail from leaving a hole in the drywall. If the hole is the result of something more serious, like a plumbing leak or a structural issue with the ceiling or floor, you’ll have to do more than just repair the drywall.

For medium-sized holes, you’ll need to screw wooden boards to the back side of the drywall and cut and attach a drywall section to those boards. This technique is called “bracing the hole.” The boards will provide a support to help keep the new drywall patch in place and to make sure it doesn’t come out of the hole again.

To finish up the project, apply a second coat of joint compound and sand with 100-grit sandpaper to remove any bumps or ridges in the new drywall surface. This step is important because it will give you a nice, smooth surface to paint over. When sanding, always use a dust mask to avoid breathing in the fine drywall powder. This is especially important if you’re working in a tight space.


It’s not uncommon for kids or a careless household member to bang into walls and leave behind a dent. However, the damage may be more than a nuisance; it can affect the integrity of the drywall and lead to future problems with moisture and other issues. It’s best to address dents in the drywall as soon as possible to avoid further problems.

To repair a dent, first use a putty knife to smooth the surface of the drywall, getting rid of any bumps or ripples. Then apply a thin layer of drywall compound with your putty knife, covering the entire area. After applying a second coat of compound and sanding lightly, you should be able to blend the patch with the surrounding wall. It’s important to note that the drywall compound must be completely dry before you paint.

If you’re trying to save money, you can attempt to fix small dents and dings yourself instead of hiring someone to do it for you. This is a relatively easy job for anyone with some experience in home repairs. However, if the damage is severe or you have no experience, it’s best to hire a professional for help.

Before beginning a repair project, shut off any power sources in the area you’re working on. This will protect you from getting shocked if there are any live wires in the vicinity of your work zone. You should also check for any pipes or other electrical components that could be damaged by your work.

Once you’ve checked for any electrical or plumbing issues, you can begin the drywall repair process. For small holes, a drywall patch kit should be enough to get the job done. Before using your patch kit, read the directions carefully to ensure you’re using the product correctly.

If you have a larger hole, you may need to replace a section of the drywall instead of just the patch. Large holes in drywall can be difficult to repair, and it’s always best to consult an expert to ensure the job is completed correctly.


If your walls have holes from fasteners, nail pops, or other minor blemishes, these can be repaired with a small drywall patch kit. These kits contain self-adhesive patches that stick to the drywall and cover the holes. These are a quick fix, but you’ll still need to use a putty knife and joint compound to smooth the repair. If you use a kit, be sure to sand the edges of the patch with a sanding block to ensure it’s as smooth as possible and blends in with the rest of the wall.

Larger holes require more work and time. Start by cutting a new piece of drywall that is at least as large as the hole and fits snugly over it. Cut another board to serve as a support board and screw it into the studs or joists above and below the hole. Be sure to sink the screws slightly to prevent them from pulling up or cracking the drywall around them.

Next, apply a coat of spackle or joint compound to the hole, sanding down the surface with a sanding block to smooth it out. Allow the spackle or joint compound to dry before applying a second coat and then sanding again. When you’re satisfied that the patch is as smooth as the surrounding drywall, paint over it with matching paint.

To make sure the patch is completely smooth, shine a light straight down on the wall to catch any shadows that could reveal pockmarks or high spots. After the final coat of paint dries, it’s a good idea to run your hands over the entire wall to feel for any rough areas that might need further sanding. Finally, shine a light on the wall to see how the finished repairs look under natural and artificial lighting. If you’re not happy with the results, consider repainting the wall to improve its appearance. For a more dramatic effect, try a color that contrasts with the existing wall or use a bold color to add interest.